Waterproofing A Commercial Building With FlowGuard - Rhinebeck, NY

Upon purchasing this commercial property, the new owner was faced with a major issue - water penetrating the building. The culprit? The pitch of the land the building was constructed on, which sloped towards the structure, compounded by the fact that it was built near a swamp. Despite having three sump pumps in place, they proved insufficient to handle the amount of water infiltration, resulting in frequent basement flooding.

To resolve the water infiltration issue, we began by removing the old baseboards and step footings to create a trench around the basement perimeter. Using jackhammers, we prepared the trench for our waterproofing system and cleared away any debris. Our solution included installing the SuperSump Plus sump pump system, with gravel and perforated pipe running through the trench and connected to the sump pump. We also installed drain mat where the curb used to be, ensuring that any water would be directed into our waterproofing system. In addition to these systems, we utilized our patented FlowGuard system along the perimeter of the basement. Finally, we applied concrete over the entire system to give it a seamless appearance. To complete the project, we installed the Basementaire dehumidifier and connected the condensate pump to the sump basin, creating a set-and-forget system. Our team left the property clean and free of debris.

Thanks to our project, the owner was able to open their business and utilize the basement for storage without worry of water infiltration. They can now have peace of mind knowing that their building is protected from water damage.